Technical Specs
PVC SPECIFICATIONS
The PVC fabrics of all our quality inflatable boats are imported from S. Korea. The technical information of 0.9mm PVC fabric is as below:
- Heavy Duty 1100 Dtex* polyester coated with plastomer on both sides, of black color, is UV/Chemical resistant.
- Air pressure internally once inflated : 4.3 psi (0.3 bar).
- USA Federal Standard FS # 191 5041/5102/5134/5970 Test method structural test results.
Total Weight (g/m2): 1055
Thickness (mm): 0.90
Cut strip tensile strength (lbs. /in.) - Warp = 450 - Weft = 404
Elongation (%) - Warp = 30 - Weft = 47
Tongue Tear (lbs.) - Warp = 87 - Weft = 100
| Test Method |
Test Item |
Unit |
Result |
| *** |
Base Fabric |
*** |
1100dtex, Polyester |
| *** |
Coating Material |
*** |
Paste PVC |
| *** |
Fabric Density |
Thread/Inch |
28/26 |
| *** |
Fabric Density |
Thread/Inch |
28/26 |
| DIN 53352 |
Fabric Weight |
GR |
235 |
| DIN 53352 |
PVC Coating Weight |
gr |
865 |
| DIN 53352 |
Finished Weight |
gr |
1100 |
| DIN 53353 |
Finished Thickness |
m/m |
0.9 |
| FS191-5102 |
Strip Tensil |
Kgf/ 2Inch |
340/300 |
| FS191-5102 |
Elongation |
% |
22/35 |
| DIN 53363 |
Trapizoid Tear |
Kgf |
45/40 |
| FS191-5970 |
Adhesion |
Kgf / 2Inch |
14.0/14.0 |
| DIN 53886 |
Hydrostatic Resistance |
Kgf/c |
45 |
| DIN 53361 |
Low Temp. Resistance |
degree C |
-25 |
| *** |
Dimension Stability |
% |
< 0.5% (at 70C 24HR) |
| DIN, NFPA701 M2 CL2, LSG |
Flame Retardant |
We meet all required flame retardant. |
| FS191-5306 |
Abrasion (H18, 1000gr) |
Cycle |
450< |
| DIN 54004 |
Light Fastness |
Grade |
6< | |
 |
- Adhesive structure
- Polyurethane glue
- Cold welding
- Made by hand
- Four layers reinforced seams
|
 |
